91-X2122-2020 20m MTP-MTP ModLink Fiber Cable Assembly, MTHD A OFNP Plenum, OM1 12 Fibers
20m MTP-MTP ModLink Fiber Cable Assembly, MTHD A OFNP Plenum, OM1 12 Fibers
Part No: 91-X2122-2020
Region: Global
Molex Plug and Play Advanced Fiber Optic Systems offer premium factory-controlled optical performance, enable flexible system configuration and fast, economical installation. ModLink™ is ideal for mission critical applications such as Data Centres and Storage Area Networks, applications where fast installation is paramount and environments where moves adds and changes are frequent or managed in-house.
Features & Benefits
- Round, flexible outer jacket is easy to bend, route and install
- Plenum (OFNP + CSA FT6) flame rating or Low Smoke Zero Halogen allows for routing cables in any indoor environment where local code allows
- Industry-leading low insertion loss (0.50dB) Maximum
- ModLink Advanced Fiber Optic Cables are 100% tested
- Pulling eyes installed to protect the assembly during installation
Technical Info
MTP Connector Specifications
Maximum Insertion Loss: OM1 Models: 0.50 dB
Attenuation Multimode OM1: 3.5dB@850nm/1.5dB@1300nm
Durability: 500 cycles
Mechanical/Environmental Specifications
Nominal Outside Diameter: 4.5mm (0.18 in)
Cable Weight: 19 kg/km (24.8 lb/kft)
Minimum Bend Radius: 6.4cm (2.5 in) short term, 3.2 cm (1.25 in) long term
Operating Temperature: 0º to 70ºC (32ºF to 158ºF)
Storage Temperature: -40º to 70ºC (-40ºF to 158ºF)
Installation Temperature: 0º to 70ºC (32ºF to 158ºF)
Jacket colors: Multimode OM1: Orange
Fiber Specification
Fiber Type: 62.5/125µ
ISO Classification: OM1
Bandwidth (MHz/km): 200/500
*Measured via Overfilled Launch per TIA/EIA-455-204
Computing Link Loss
Compute the cable loss using the maximum attenuation per km and multiply the length of the cable. Add the maximum insertion loss of the cassettes to the total cable loss to determine your maximum budget. Remember, the insertion loss of all the connectors on the ModLink Cable is included in the cassette insertion loss figure. Test reports are available for each ModLink Cable and Cassette. Actual loss can be determined from those optical test reports.
Applications
ModLink systems are designed to support a variety of high-speed network topologies including:
IEEE 802.3 10GBase-SR/SW 10Gbps
IEEE 802.3 10GBase-LX4 10Gbps
Fiber Channel 400-M5-SN-1 4Gbps
Fiber Channel 1200-M5E-SN1 10Gbps
Fiber Channel FC-PH 1Gbps
IEEE 802.3 1000Base-SX/LX 1Gbps
FDDI 100Mbps
IEEE 802.3 FOIRL 10Mbps
IEEE 802.3 10Base-F 10Mbps
ATM 155 Mbps, 622 Mbps, 1.2 Gbps. 2.4 Gbps
Performance
Ordering Info
-
Flyers
ModLink™ Plug & Play Copper Solution Flyer
The ModLink™ solution flyer provides an overview of the ModLink iPass Plug and Play copper range, highlighting features and benefits as well as technical and ordering information.
ModLink™ Plug & Play Fiber Solution Flyer
The ModLink™ solution flyer provides an overview of the ModLink MPO Plug and Play fiber range, highlighting features and benefits as well as technical and ordering information.
Vertical Rack Manager (VRM) Solution Flyer
The Vertical Rack Manager solution flyer provides an overview of the product, highlighting features and benefits as well as technical and ordering information.
-
Brochures
Technical and System Applications Guide - APAC
The Technical and System Applications Guide details useful information on the design and specifications of structured cabling systems, which has been written specifically for Asia Pacific region.
Company Overview Brochure
The Company Overview brochure from Molex Premise Networks provides information about the company and gives an overview of the solutions and products we offer.
-
Technical Articles
The need to deliver more user-friendly cabling networks has led to a change in the infrastructure model for structured cabling systems. This white paper examines some of the issues involved with the new architecture and provides guidance on design and testing of such systems to facilitate successful implementation.
Clearly careful design is required in the planning of a Data Center. Managing the clients' expectations from the outset is crucial if an acceptable compromise is to be reached. Ultimately the question to ask is "How valuable is your data?".
Installation of a cabling system in healthcare facilities involves consideration of many factors. The healthcare field provides one of the most demanding environments for a structured cabling system. Facilities are designed to operate for 50 years or longer. Adoption of 10GBase-T Ethernet is rapidly increasing and is expected to be the standard for the foreseeable future in healthcare facilities.
This article discusses the best solution for the modern day healthcare facilty.
With most of the new technologies that continue to flood the world today, there is a myriad of accompanying “best practices” that also emerge. Not surprisingly, managing all of the change wrought from new technologies is a tremendous task. New cabling media, wireless media, factory-built cabling systems and changing standards are placing an enormous amount of stress on designers, installers and end users. This stress comes in the form of new challenges.
It is a widely accepted statistic that 70% of LAN failure is attributed to cabling**. This does not mean organizations are purchasing faulty systems, on the contrary, modern cabling is a stable system which seldom fails and is backed in most cases by comprehensive long term 25 year warranties. Network failures attributed to cabling are effectively management failings in the form of poor control and documentation practices that must be addressed.
-
Case Studies
Intermedia Communications, now owned by MCI WorldCom, completed the installation of combined pre-connectorized MUTOs, wall-plates and the plug and play Modlink™ fiber system, in less than a week.
-
Catalogs
Product and Solutions Guide
The Molex Premise Networks product guide, features over 1000 products available throughout North America, Central and Latin Americas. It showcases structured cabling products in both copper and fiber, ranging from category 5e, 6 and the latest 10 Gigabit Ethernet standard. Also featured is the Canobeam™ Free Space Optics product range and MPO Plug and Play system , Modlink™.
Related videos
top of page
by category
Advanced Search Options
